|
| Home > Accessories > Geovision GV-Wiegand Capture Access Control Integration |
Geovision GV-Wiegand Capture Access Control Integration |
Geovision GV-Wiegand Capture Access Control Integration
SKU: GV-WIEGAND
GV-Wiegand Capture is a box device that can integrate your current Wiegand access control system into DVR systems manufactured by GeoVision. Through the GV-Wiegand Capture, the photo identification and text data from the access control can be easily combined on the video data from DVR. The GV-Wiegand Capture is ideal for access control, time and attendance, or authorized access management where video data is required. The security can use the higher security level of the combined video data for live monitoring during busy hours, and for recording during off-peak hours.
|   ![Geovision GV-Wiegand Capture Access Control Integration]()
|
Part Number: GV-WIEGAND
|
Specifications |
|
Communication |
RS-232 |
DB9
Female |
|
RS-485 |
Terminal Block |
|
Input |
Input |
2 |
|
Input
Signal |
12V
Voltage input / dry-connect input |
|
High
State |
9~12V /
close |
|
Low State |
0V /
open |
|
Output |
Relay Output |
2 |
|
Relay Status |
Normal Open |
|
Relay
Capacitance |
3A /
VAC125V, 1.5A / VAC250V |
|
Relay
ON Time |
4ms |
|
Relay
OFF Time |
4ms |
|
Wiegand
|
Input
Connector |
12V,
D0, D1, GND |
|
Output
Connector |
12V,
D0, D1, GND |
|
Format |
Wiegand
26 Bits~40 Bits |
|
DC IN
|
DC 12V,
1A |
|
Environmental Conditions |
Operation Temperature |
0~55°C
(32~104°F) |
|
Humidity |
5%~95%
(non-condensing) |
|
Dimensions |
120mm
(W) x 68mm (H) x 26mm (D) |
|
|
|
